DIY Installation of Swimming Pool Fencing in Brisbane

Installation instructions:

12mm Frameless glass fencing installation instructions PDF

Tools required for 12mm frameless glass fencing installation:

  • Good steel tape measure
  • String line
  • 1200mm level
  • Selection of rubber, timber blocks, old carpet etc to protect glass panels from hard surfaces
  • Hammer/chisel to clean out core hole if required and to tap in wooden wedges
  • Pencil and Felt tip markers for concrete or timber installation
  • Core drill and 72-76mm bit (Kennards discount hire voucher with order) for core drilling into concrete base
  • Sikaflex high strength flow grout or similar to secure posts in core drilled holes
  • Allen keys to secure our stainless steel screws for spigots with base, also to adjust spigot glass tension
  • Timber wedges for temporary supporting glass panels whilst grout is drying (2 per spigot)
  • Flat, clean timber for sandwiching glass panels together whilst grout is drying (can be plywood or any off cuts)
  • G clamps to clamp together timber around glass, as above
  • Weak mixture of methylated spirits and water to clean glass after installation

Contact us for more information about our quality, simple DIY swimming pool fencing from Brisbane.

Leave a Reply

Affordable DIY Glass Pool Fencing