DIY Installation (Semi-frameless Glass Fencing)

Installation instructions:

Semi-frameless glass fencing installation instructions PDF

Tools required for semi-frameless glass fence installation:

  • Good steel tape measure
  • String Line
  • 1200mm Level
  • Selection of rubber, timber blocks, old carpet etc to protect glass panels from hard surfaces
  • Spray paint marker or push in marker pegs for soft ground installation
  • Post concrete for soft ground post installation (minimum 20kg bag per post)
  • Hammer/chisel to clean out core hole if required and to tap in wooden wedges
  • Core drill and 72-76mm bit (Kennards discount hire voucher with order) for core drilling into concrete base
  • Allen key to secure our stainless steel screws for posts with base
  • Sikaflex high strength flow grout or similar to secure posts in core drilled holes
  • Timber wedges for temporary supporting posts whilst grout is drying (4 per post)
  • Hacksaw or drop saw to cut glass support in fills
  • Reciprocating saw with medium steel blade, for cutting off excess height of post after glass is fitted
  • Weak mixture of methylated spirits and water to clean glass after installation

Leave a Reply

Affordable DIY Glass Pool Fencing