How to Order (Frameless)

Glass Panels

  • Choose from the 12mm toughened glass panels in the store pages. Note:  For pool safety compliance gaps between glass panels can be from 20mm to 99mm wide.
  • Choose from our range of pre-drilled hinge panels, if you require a gate
  • Choose any panel as a gate latch panel (minimum panel width 800mm)
  • Choose 8mm toughened glass gate if required. Remember gap to be left between glass hinge and latch panel for gate to fit is 853mm.

Spigots

Spigots (mini posts)  in choice of styles and materials are available as follows: ( 2 per glass panel )

Techline square profile spigot in 316 grade polished stainless steel for fitting into core drilled holes in concrete.

Techline square profile spigot In 316 grade polished stainless steel with 4 hole square base for fitting to timber decks with 4 coach/batten screws, or, into concrete with 4 Dyna Bolts or similar.                                                                      

Smoothline round profile spigot in 316 grade polished stainless steel for fitting into core drilled holes in concrete.

Smoothline roundprofile spigot in 316 grade polished stainless steel with 4 hole round base for fitting to timber decks with 4 coach/batten screws,  or,  into concrete with 4 Dyna Bolts or similar.                                                         

Alutech square profile spigot in anodised architectural aluminium for fitting into core drilled holes in concrete.

Alutech square profile spigot  in anodised architectural aluminium with 4 hole square base                          For fitting to timber decks with 4 coach/batten screws or into concrete with 4 Dyna Bolts,  or,  similar.

 All spigots come complete with either cover rings or dome covers for a neat finish.

 

Gate Fittings

Hinges for a gate fitted in a straight line fence you require - 1 set of 316 grade stainless steel 180 degree self-closing hinges.

Latches  for gates fitted in straight line fences –  1 set of 316 grade stainless steel 180 degree glass to glass self-latch required

Latches for gates latched to wall or timber post – 1 set of 316 grade stainless steel, glass to post self-latch required

Latches for gates latching to 90 degree glass return (external corner only) - 1 x 316 grade stainless steel glass to 90 degree glass self-latch required.

 

For more detailed information on 12mm Frameless glass systems:

Frameless Glass Systems Installation Instructions

Leave a Reply

Affordable DIY Glass Pool Fencing